Access Virus TI2 Desktop Very Clean w/ New Battery, PSU + HQ USB Cable
Access Virus TI2 Desktop Very Clean w/ New Battery, PSU + HQ USB Cable
Couldn't load pickup availability
For sale: Access Virus TI2 Desktop digital synthesizer in perfect working order and excellent, near-mint cosmetic condition. This is a very well cared-for synth and is among the cleanest TI2 desktops you'll find available for sale in 2026.
Ships with a high-quality aftermarket power supply and a high-quality, heavily shielded 1.5M (4.92 ft) USB cable optimized for audio streaming over USB.
*Shop Pay is required for purchase of this item. Orders placed via other payment methods will be declined unless an exception has been discussed and approved in advance.
Details below:
All pots and tact switches work flawlessly.
Installed a new Energizer lithium cell CR2032 battery. You should not need to worry about the battery for ~10 years.
Both backlights work as intended on the display.
The LCD bezel has been polished to look its best.
Updated to OS version 5.1.7.
The panel board is exceptionally clean with no dust or debris (a sign the unit was covered and very well taken care of).
Please examine all photos carefully, as we have done our best to document the condition.
The Virus TI2 is a monster of a polyphonic, multitimbral analog-modeling synth. With dual DSP processors, 64 waveforms, 100 wavetables, two filters, three LFOs, an advanced modulation matrix, and a deep suite of effects, the sonic possibilities are virtually endless. The TI2 offers up to 110 voices of polyphony and is 16-part multitimbral, with three stereo analog outputs plus audio streaming over USB via the Total Integration plugin. On supported systems, three independent stereo pairs can appear directly within your DAW, allowing individual Virus parts to be processed with EQ, compression, effects, automation, and third-party plugins as part of your normal mixing workflow. The three analog stereo outputs may also be used simultaneously, providing up to six stereo output pairs across USB and the analog outputs in Multi Mode.
This is a very clean and beautiful example of "The King" 👑 :)
Mac and Windows 11 users, please do your homework before buying if you intend to use the original Total Integration plugin. The Access software is a legacy system, and compatibility depends on your operating system, DAW, and USB setup. It works perfectly and is an absolute thing of beauty in Windows 10 / Cubase 15. Some users report it also works fine in Windows 11, but there may be some additional config with the new driver signing requirements (some users report there is, some don't).
TI Revive looks particularly interesting, and we've heard a lot about it from users, but have not yet tested it out ourselves. This free, open-source project brings Total Integration to Windows 11, macOS (Apple Silicon and Intel), and Linux, with DAW control, patch editing, automation, and audio streaming over USB. It is still in active development, so please check its current release notes and compatibility with your exact setup before relying on it.
Also, Virux is a promising third-party project bringing Virus TI integration to Apple Silicon Macs, with plugin control and audio streaming over USB. It is still in development, so please check its current release status and support for your exact hardware and software before relying on it.
Mac & iPad users can check out Patch Base for controlling the TI2 (and many other synths!) outside of a DAW environment. There is a 7-day free trial and the developer is a great dude.
All TIs can also be used independently of the TI plugin through their standard MIDI and audio connections.
Sale includes the synth, high-quality aftermarket power supply, high-quality, heavily shielded 1.5M (4.92 ft) USB cable, and free shipping to the continental US.
- Guaranteed as described or your money-back.
- 15-day return window. See return details.
- Questions? Email or chat with us anytime.
No sales tax collected on orders outside Texas. A signature is required for delivery. We ship via UPS, FedEx, and USPS. Email us before or after checkout if you have a preference.
We accept 15-day standard returns. We take great care to ensure your items arrive as described. See our Refund Policy and Shipping Policy for more details.
View our verified reviews on Google, eBay, and Reverb.
If you make a purchase, please opt in to the Google Reviews survey on the thank you or order status page to help the shop grow. Thanks for supporting our small business :)
Share this item
We strive for accuracy, but errors can occur. Please verify details or contact us with questions.
- Synthesis Type: Access Virus TI2 dual-DSP synthesizer engine with virtual analog, wavetable, HyperSaw, FM, ring modulation, grain table, formant table, and expanded later-generation Virus sound design features
- Polyphony: Up to 110 voices, depending on patch complexity, oscillator mode, unison, filter selection, modulation, and effects load
- TI2 Upgrade: The TI2 generation adds more DSP headroom than the original Virus TI series, giving complex patches, multitimbral arrangements, and effects-heavy programming more room to breathe
- Multitimbrality: 16 independent parts in Multi Mode for layered sounds, splits, and multichannel sequencing from a single hardware synth
- Oscillators: 3 main oscillators per voice plus sub oscillator and noise generator
- Classic virtual analog waveforms including saw, pulse, sine, triangle, and variable wave shapes
- HyperSaw oscillator for stacked supersaw leads, wide pads, aggressive trance textures, and dense modern electronic sounds
- Expanded wavetable oscillator resources for evolving digital tones, metallic motion, glassy pads, and complex harmonic movement
- Grain table and formant table oscillator modes for more experimental digital textures, vocal-like tones, and animated spectral movement
- Oscillator sync, ring modulation, FM, pulse width modulation, detune, spread, and sub oscillator support
- Filters: Dual multimode filters per voice with flexible routing
- Low pass, high pass, band pass, and band stop modes
- Selectable 12 dB and 24 dB slopes
- Serial, parallel, and split routing options for more complex patch architecture
- Analog Filter mode modeled after a classic MiniMoog-style cascade filter with variable slope and self-oscillation
- Filter saturation and drive options for extra weight, edge, and analog-style movement
- Effects and Processing: Expanded 16-part effects architecture designed for serious multitimbral production
- Independent effects processing across all 16 Multi Mode parts, allowing complete arrangements without flattening everything through one shared effects path
- Delay and reverb available per part, not just as a single global send
- Chorus, flanger, phaser, ring modulator, frequency shifter, rotary speaker, tape-style delay, distortion, character processing, and additional tone-shaping effects depending on installed OS version
- Expanded distortion and drive models for subtle saturation, analog-style grit, acid bite, heavy digital edge, and aggressive industrial textures
- 3-band EQ per part for shaping individual sounds inside a multitimbral arrangement
- 32-band vocoder for vocals, robotic textures, synthetic choir effects, and external audio processing
- Modulation: Deep modulation system for animated, performance-ready sound design
- 3 LFOs per voice with multiple waveforms, tempo sync, and extensive destination routing
- Dedicated filter and amplifier envelopes
- Flexible modulation matrix for routing LFOs, envelopes, velocity, aftertouch, MIDI controllers, and performance controls to multiple destinations
- Excellent for evolving pads, synced sweeps, rhythmic gating, aggressive bass movement, and expressive live performance patches
- Arpeggiator: Programmable arpeggiator per part with tempo sync, pattern control, gate, swing, and performance-friendly rhythmic options
- Total Integration: USB connection supports Access Total Integration for plug-in style DAW control, patch editing, automation, MIDI, and compatible audio-over-USB workflow when used with a supported computer, operating system, DAW, and Access software version
- Memory: Large onboard library with user banks, ROM banks, multi programs, and access to additional Virus sound libraries through computer-based management tools
- Controls:
- Hands-on front panel with dedicated sections for oscillators, filters, envelopes, LFOs, effects, arpeggiator, and performance controls
- Desktop and rack format delivers the full Virus TI2 sound engine without taking up keyboard space
- Display, knobs, buttons, and status LEDs provide direct hardware control for editing, performance, and studio work
- Connectivity:
- MIDI In, Out, and Thru via 5-pin DIN
- USB for Total Integration, MIDI, editor/librarian workflow, and compatible audio-over-USB operation
- 6 analog outputs arranged as 3 stereo pairs
- 2 analog audio inputs for external signal processing
- S/PDIF digital I/O, headphone output, and standard studio connectivity
- Use Cases:
- Trance, techno, industrial, ambient, synthwave, electro, IDM, pop, scoring, and experimental sound design
- Supersaw leads, huge pads, tight basses, metallic digital textures, plucks, arps, vocoder parts, external audio processing, and full multitimbral arrangements
- Studio sequencing, live performance, DAW hybrid production, and deep hardware sound design

-
Questions? Offers? Let's Talk Synths.
Email or chat with us anytime. We've restored and sold hundreds of synths. Whether you need buying advice, details on this unit, or have other questions, we're happy to help. If you need repair advice or help sourcing parts for your own unit, please create a ticket.
- Choosing a selection results in a full page refresh.
- Opens in a new window.
Like what you're looking at?
Feel free to make an offer.
Submit your offer. Captain Black will review your offer and respond to accept, decline or counter offer.