Access Virus Classic Recap Kit (Main Board & Panel Board)

For sale: Access Virus Classic Desktop recap kit based on the same capacitor configuration used in our Virus Classic restorations.

This kit is based on our testing across multiple Access Virus boards. The goal was to closely match the electrical behavior of the original factory-installed capacitors while avoiding regulator noise, instability, and other aberrant behavior that can occur when unsuitable replacements are used.

Capacitor values alone do not tell the whole story. Simply matching capacitance and voltage ratings does not guarantee results. ESR, ripple current, impedance characteristics, and other electrical parameters can materially affect performance. This kit was assembled through real-world installation, testing, and long-duration stress testing, and is based on the same configuration we use in our Virus Classic restorations.

It is worth noting that many Access Virus Classic units exhibiting issues can often be restored to normal operation by replacing capacitor "G" alone. A full recap is not required in every case. This kit is intended for advanced users, restorers, and those seeking to proactively address aging electrolytic capacitors as part of a long-term reliability strategy.

Details below:

Includes capacitors for the main and panel boards.
Includes capacitor location diagram and reference guide.
The capacitor in the "H" position is 4.7uF 100V. The Virus Classic kit includes the 100V version only.
Panel board capacitors are included, but we do not recommend recapping a healthy panel board solely for preventative maintenance. These capacitors are packaged separately in bags labeled "PB" and are not shown in the capacitor location diagram.
This guide is currently documented for the Access Virus Classic desktop main board only. It is based on the Access Virus Classic desktop board configuration we have verified.
Compatibility with rack models has not been verified. Do not assume compatibility without verifying your actual board. We will update our guidance as we are able to document more boards.
Board revisions and component layouts may vary. Additional board revisions or component variations may exist that we have not yet encountered or documented. Always verify every capacitor value, voltage rating, polarity, and location against your original PCB before installation. Your physical board should always be considered authoritative and takes precedence over this guide.
Installation is performed entirely at your own risk. This is not a beginner repair. Incorrect capacitor selection, orientation, soldering technique, installation procedure, power supply selection, or failure to verify the original board can damage your synthesizer. Captain Black's Gear Emporium assumes no responsibility for damage, injury, data loss, equipment failure, or other consequences resulting from the use of this guide, the installation of replacement components, or repair work performed by others.

For best results, we recommend using a modern, regulated 9V DC power supply such as the Triad 9V 2.0A adapter available separately from our website.

Sale includes the Access Virus Classic Desktop recap kit and capacitor location diagram and reference guide. We have also made a printable PDF version available for download.